MW Type FV Wall Panel

MW Type FV Wall Panel – Connection technology

Concealed fitting: MW Type FV Wall Panel

Demanding architecture and strict fire prevention regulations – ROMA type FV insulation panels let you achieve both objectives. The non-combustible stone wool insulating core is available in eight different gauges. The large selection of materials and colours offers even more choice. The delicate microlining and the concealed attachment focus attention on the creative flair of the wall and façade design.

Numerous benefits:

  • concealed fitting
  • insulating core A1 building material class A2-s1; d0 certified to EN 14509 – non-combustible
  • available in two different volume weights, as required in each application
  • simple and quick assembly
  • module width 1,000 mm
  • steam-tight cover shells
  • 3 different surface profiles
  • wide beam and support spacing
  • both vertical and horizontal assembly possible

Sample applications

Schrapp & Salzgeber, Illertissen

Carpentry

Information

FV120 RAL 9006 and RAL 1007

Redbloc, Plattling

Brick prefabricated element system

Information

FV+120; RAL 7016, D162 RAL 7016

Coating

Our products are available in a variety of coatings. Click here to select the coating that best suits your project.
Please contact us about other coating systems and color Options.

Polyester finish

Polyester coating is a smooth polyester resin-based protective layer suitable for applications in non-aggressive outdoor conditions.

This coating type is standard for ROMA panel exterior finishes. Polyester finishes in selected, bright colors are physiologically harmless.

Color chart

*
Special color (no surcharge for orders of 100m² or more of 0.6mm outer face)
**
special finishes

  • RAL 9010 Pure white
    exterior*
  • RAL 9001 Cream
    exterior*
  • RAL 9002 Gray white
    exterior, interior*
  • RAL 7035 Light gray
    exterior*
  • RAL 7042 Traffic gray A
    exterior*
  • RAL 1015 Light ivory
    exterior*
  • RAL 1002 Sand yellow
    exterior*
  • RAL 1023 Traffic yellow
    exterior*
  • RAL 2001 Red orange
    exterior*
  • RAL 3000 Flame red
    exterior*
  • RAL 3009 Oxide red
    exterior*
  • RAL 8004 Copper brown
    exterior*
  • RAL 8011 Nut brown
    exterior*
  • RAL 8014 Sepia brown
    exterior*
  • RAL 6005 Moss green
    exterior*
  • RAL 6011 Reseda green
    exterior*
  • RAL 5010 Gentian blue
    exterior*
  • RAL 9006 White aluminum
    exterior
  • RAL 9007 Gray aluminum
    exterior
  • RAL 7016 Anthracite gray
    exterior
The colors displayed on your screen may vary from the actual colors of the materials.
ROMAplus 50µm

Due to its polyamide content, ROMAplus is characterized by a slightly grainy surface structure. This type of coating is perfect for demanding outdoor use. Excellence resistance to a large number of chemicals as well as outstanding corrosion resistance and high surface hardness make it suitable for a wide variety of applications. Availability in further colors on request.

*
Special color (no surcharge for orders of 100m² or more of 0.6mm outer face)
**
special finishes

  • RAL 9010 Pure white
    exterior**
  • RAL 7016 Anthracite gray
    exterior**
  • RAL 3009 Oxide red
    exterior**
  • Stratos
    exterior**
  • Mesos
    exterior**
  • RAL 9002 Gray white
    exterior**
The colors displayed on your screen may vary from the actual colors of the materials.
PVDF

PVDF is a polyvinyl difluoride-based coating, with excellent durability against solvents and chemicals. In addition, it is extremely weather-resistant. This type of coating is ideal for use in roof and façade panelling.

Color chart

*
Special color (no surcharge for orders of 100m² or more of 0.6mm outer face)
**
special finishes

  • on request
    exterior**, interior**
The colors displayed on your screen may vary from the actual colors of the materials.
Hard PVC foil

A polyvinyl chloride foil coating possesses extreme resistance to mechanical stress due to its thick 150µm layer. Hard PVC film coatings are physiologically harmless. For indoor applications only.

Color chart

*
Special color (no surcharge for orders of 100m² or more of 0.6mm outer face)
**
special finishes

  • RAL 9010 Pure white
    interior**
The colors displayed on your screen may vary from the actual colors of the materials.
Wood effect finish

This finishes are available in Polyester 35µm. We also have an extensive portfolio of decorative finishes (minimum order quantities apply).

*
Special color (no surcharge for orders of 100m² or more of 0.6mm outer face)
**
special finishes

  • Golden Oak
    exterior**
  • Dark Zebrano 3D
    exterior**
The colors displayed on your screen may vary from the actual colors of the materials.
DU coating

With a thickness of 15 – 17 µm, this coating is suitable for indoor applications only. The colour of DU resembles RAL 9002. ROMA cannot guarantee an exact colour match.

Color chart
  • RAL 9002 Gray white
    interior
The colors displayed on your screen may vary from the actual colors of the materials.
Stainless steel

Available as material numbers 1,4301 or 1,4404, respectively, in two alternative surfaces: shiny (2b or, previously 3c) and sanded (grain 240 duplo-sanded). Ideal for areas that are frequently cleaned cleaning or exposed to severe corrosion.

  • blank
    exterior
  • ground
    exterior
The colors displayed on your screen may vary from the actual colors of the materials.
Aluzinc

As special finish AZ 185, this sheet steel is coated with a finish of 55% aluminium, 43,4% zinc and 1,6% silicon. Its coating weight is 185 g/m², making indoor and outdoor use possible (marking: AZ185).

*
Special color (no surcharge for orders of 100m² or more of 0.6mm outer face)
**
special finishes

  • AZ 185
    exterior*
The colors displayed on your screen may vary from the actual colors of the materials.

Surfaces

Lined

Lined

Streamlined, timeless and robust. The classic surface design.

Surface type

exterior*, interior

Microlined

Microlined

Fine microlining creates a unique play of light and shadow for elegant façades.

Surface type

exterior

Smooth

Smooth1

Smooth surfaces are easy to clean and recommended for use in areas subject to strict hygienic standards.

Surface type

exterior*, interior*

*
special coating
1
undulations within the range of tolerance may be more obvious on smooth surfaces when light conditions (e.g. position of the sun) are not favourable.